clutch slip
5 posters
Page 1 of 1
clutch slip
Took the yam wasp out today for the first time and went well, the clutch is slipping now and again.What would be the best clutch to put in and where would i get one from.
gilo- Posts : 144
Join date : 2010-04-19
Age : 54
Location : Oxfordshire
Re: clutch slip
You need to speak to Tom at Demon MX. He brings in Barnett clutches from the states, don't waste your time with an EBC.
01233 668201 or 666996
01233 668201 or 666996
doogle- Posts : 259
Join date : 2009-05-15
Age : 99
Location : hampshire
Re: clutch slip
Try some heavy springs if u haven't already, available from mikesxs.com.
I have machined a small amount off the clutch hub, and a small amount off the pressure plate, enough to fit 8 plates in, instead of the STD.7, or 6 on early models.
I think Halco used to do this mod.
Cheers,
Matt
I have machined a small amount off the clutch hub, and a small amount off the pressure plate, enough to fit 8 plates in, instead of the STD.7, or 6 on early models.
I think Halco used to do this mod.
Cheers,
Matt
270YAM- Posts : 22
Join date : 2010-08-04
Age : 35
Location : Australia
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|