clutch slip

View previous topic View next topic Go down

clutch slip

Post  gilo on Sun Jul 25, 2010 3:07 pm

Took the yam wasp out today for the first time and went well, the clutch is slipping now and again.What would be the best clutch to put in and where would i get one from.
avatar
gilo

Posts : 144
Join date : 2010-04-19
Age : 47
Location : Oxfordshire

View user profile

Back to top Go down

Re: clutch slip

Post  sidekick39ish on Sun Jul 25, 2010 4:59 pm

avatar
sidekick39ish
Admin

Posts : 1570
Join date : 2009-01-15
Age : 34
Location : south coast.

View user profile http://twinshock-chairs.webs.com

Back to top Go down

Re: clutch slip

Post  Twinshock 10 on Mon Jul 26, 2010 8:46 am

Or give me a call on 07771 547406
Keith
avatar
Twinshock 10

Posts : 341
Join date : 2009-01-16

View user profile

Back to top Go down

Re: clutch slip

Post  doogle on Mon Jul 26, 2010 3:31 pm

You need to speak to Tom at Demon MX. He brings in Barnett clutches from the states, don't waste your time with an EBC.

01233 668201 or 666996
avatar
doogle

Posts : 259
Join date : 2009-05-15
Age : 92
Location : hampshire

View user profile

Back to top Go down

Re: clutch slip

Post  270YAM on Thu Aug 05, 2010 12:22 am

Try some heavy springs if u haven't already, available from mikesxs.com.

I have machined a small amount off the clutch hub, and a small amount off the pressure plate, enough to fit 8 plates in, instead of the STD.7, or 6 on early models.
I think Halco used to do this mod.

Cheers,
Matt

270YAM

Posts : 22
Join date : 2010-08-04
Age : 29
Location : Australia

View user profile

Back to top Go down

Re: clutch slip

Post  Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum