Bullet proof clutch
4 posters
Page 1 of 1
Bullet proof clutch
Any suggestions out there for building a bullet proof clutch for a Triumph. I run a pre-unit twin-shock Triumph outfit in Long Distance Trials (cross between one day trials and enduro). Triumph gearbox with a 4 spring clutch, I've got an alloy SRM pressure plate and have tried various combinations of clutch plates,springs, primary oil, etc but it doesn't respond well to being slipped in tight trials sections then cooks and slips on big hill climbs
Mike Fisher- Posts : 2
Join date : 2009-11-12
Re: Bullet proof clutch
we had the same problem on the tribsa fitted norton box and clutch in the end much better
blobby
blobby
blobby- Posts : 148
Join date : 2009-01-15
Location : Carlton
Re: Bullet proof clutch
Get rid of the oil and put a good belt drive on.x
olive114- Posts : 135
Join date : 2009-03-17
Location : Kent
Re: Bullet proof clutch
Thanks, what belt drive/dry clutch combination do you suggest?
Mike Fisher- Posts : 2
Join date : 2009-11-12
Re: Bullet proof clutch
Will have a word with a friend of ours that does belt drives and see if he does them for Triumphs.They seem to work ok on our Mick/Sue outfit and also got one on the Godden outfit(untested as yet).x
olive114- Posts : 135
Join date : 2009-03-17
Location : Kent
?????
Are they two words you can put together??? bulletproof and Triumph!!!!!
adam- Posts : 232
Join date : 2009-01-17
Re: Bullet proof clutch
Mike,sent you a personal message,if I didn't do it right and you not get it us on 01233 840323.x
olive114- Posts : 135
Join date : 2009-03-17
Location : Kent
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|