geting parts nickle plated ?.
+3
Mallows
doogle
ivorbeegon
7 posters
Page 1 of 1
geting parts nickle plated ?.
i need to get my wasp swinging arm n forks re nickled as it peeling off in places...anyone know where i can get a good job done ? around the reading guilford area...thanks. ivor
ivorbeegon- Posts : 3
Join date : 2011-12-08
Re: geting parts nickle plated ?.
Speak to Mick Perry at Hampshire electroplaters.
They do all Wasps work, and have done for years and years.
I just had Ethel redone, and the frame looks brand new.
I will post some pictures tomorrow.
Not cheap, but brilliant job.
02380 225639
They do all Wasps work, and have done for years and years.
I just had Ethel redone, and the frame looks brand new.
I will post some pictures tomorrow.
Not cheap, but brilliant job.
02380 225639
doogle- Posts : 259
Join date : 2009-05-15
Age : 98
Location : hampshire
Re: geting parts nickle plated ?.
Before:
After:
After:
doogle- Posts : 259
Join date : 2009-05-15
Age : 98
Location : hampshire
Re: geting parts nickle plated ?.
I'm no expert on frame building Doogle, but i'm sure the forks go the other way round!!!!
Mallows- Posts : 105
Join date : 2009-09-24
Location : essex
Re: geting parts nickle plated ?.
That's why I stand on the side, and you sit on the bike Shaun...
doogle- Posts : 259
Join date : 2009-05-15
Age : 98
Location : hampshire
Re: geting parts nickle plated ?.
Looks good dug but am not sure if that sand rail is standard
keaneo- Posts : 1
Join date : 2011-07-18
Re: geting parts nickle plated ?.
I'm reminded of that famous quotation " you can't polish a turd"
but, as Adam told me
"you can roll it in glitter"
but, as Adam told me
"you can roll it in glitter"
Twinshock 10- Posts : 341
Join date : 2009-01-16
Re: geting parts nickle plated ?.
Glitter for us then Keith, eh
shepherd- Posts : 240
Join date : 2009-01-22
Age : 71
Location : DORDOGNE, (24) FRANCE
Re: geting parts nickle plated ?.
Twinshock 10 wrote:I'm reminded of that famous quotation " you can't polish a turd"
but, as Adam told me
"you can roll it in glitter"
You can't polish bananaman yellow powder coat either....
And lets face it, with my track record there will be more polishing than racing.
doogle- Posts : 259
Join date : 2009-05-15
Age : 98
Location : hampshire
grit blasting
Apart from being an ace passenger from the past looking for a ride, as old as your dad but without the zimmer frame, I can also offer you all my services to blast clean your wasp frames to remove old nickel plating and crap from the past, I can also remove bird shit welds and weld again properly before you replate. Logans the name, 07973 655880 Guildford area call me any time.
Re: geting parts nickle plated ?.
Very useful to know Peter -I'll be in touch when mine needs doing. Can you also do vapour blasting ?
Keith
Keith
Twinshock 10- Posts : 341
Join date : 2009-01-16
vapour blasting
Sorry only abrasive blast cleaning, using fine crushed glass. I can also weld frames and apply epoxy coatings. My friends up in Ash Vale near Alsershot do fine blasting of engine parts, casings and the like, they use vapour blasting, they are called Elgamec, speak to Nigel or Paula.
Similar topics
» wasp parts,yam motor and parts
» yam motor and parts
» WASP PARTS
» yamaha xs parts
» eml mini jumbo parts
» yam motor and parts
» WASP PARTS
» yamaha xs parts
» eml mini jumbo parts
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|