TWINSHOCK-CHAIRS
Would you like to react to this message? Create an account in a few clicks or log in to continue.

carb settings

+2
Twinshock 10
graham82
6 posters

Go down

carb settings Empty carb settings

Post  graham82 Wed Oct 20, 2010 9:31 pm

hi there im building a wasp with a yam 650 taken out to a 750cc ive got a 2 into 1 manifold so i can run single mikuni carb (vm38-9 ?) does anyone no what size jets i should use ?

graham82

Posts : 40
Join date : 2010-05-30

Back to top Go down

carb settings Empty Re: carb settings

Post  Twinshock 10 Thu Oct 21, 2010 9:53 am

I run exactly the same engine with a 2 into 1 and a 40mm Dellorto. Get a 38 or 40mm Dellorto and Dellorto in Reading will supply the perfect jetting/slide for the job. Do not run a Mikuni - rarely works anywhere near as well
Twinshock 10
Twinshock 10

Posts : 341
Join date : 2009-01-16

Back to top Go down

carb settings Empty Re: carb settings

Post  gilo Sat Oct 23, 2010 6:19 pm

hey kp i got a mikuni, and its not that old but it pisses out feul untill its running, and the rpm is all over the place. Or are you just the valve champ. Rolling Eyes
gilo
gilo

Posts : 144
Join date : 2010-04-19
Age : 54
Location : Oxfordshire

Back to top Go down

carb settings Empty carb

Post  adam Sat Oct 23, 2010 8:11 pm

Mikuni = pants, i adjusted the float height on mine to stop it pissin fuel,,, But as the old sauage guzzler KP said they are shit.... carb settings 61837
adam
adam

Posts : 232
Join date : 2009-01-17

Back to top Go down

carb settings Empty carb settings

Post  graham82 Sat Oct 23, 2010 8:18 pm

thanks for the advise how much am i looking at for a carb that will do the job ?

graham82

Posts : 40
Join date : 2010-05-30

Back to top Go down

carb settings Empty Re: carb settings

Post  Twinshock 10 Mon Oct 25, 2010 9:33 am

Will you blokes just do as you are told and get a Dellorto fitted
Contact Mark at Kamar Motorsport for full info. He can supply a new carb with correct jets and slide.
Gilo - I'm charging you for all further advice by the hour !! Adam,I've got a pair of 34mm Dellortos if you want them
xx
Twinshock 10
Twinshock 10

Posts : 341
Join date : 2009-01-16

Back to top Go down

carb settings Empty Re: carb settings

Post  gilo Mon Oct 25, 2010 7:33 pm

sorry kp i wont ask for help again. but where was you at binsted when a stone ended my clutch arm in the first race.And i had the beers ready saturday night, or was you still asleep on bend some where. Laughing
gilo
gilo

Posts : 144
Join date : 2010-04-19
Age : 54
Location : Oxfordshire

Back to top Go down

carb settings Empty Re: carb settings

Post  Twinshock 10 Tue Oct 26, 2010 9:26 am

Told you that you need a clutch conversion-again available from Mark at Kamar. Sorry I missed a free beer, nothing upsets me more.
See you at Binsted next month?
Twinshock 10
Twinshock 10

Posts : 341
Join date : 2009-01-16

Back to top Go down

carb settings Empty Re: carb settings

Post  gilo Wed Oct 27, 2010 4:03 pm

yes mate me and kieran will be there saturday. who said the beers are free..you said your charging me by the hour, you spent 15 min on the outfit that = one can . carb settings 681261
gilo
gilo

Posts : 144
Join date : 2010-04-19
Age : 54
Location : Oxfordshire

Back to top Go down

carb settings Empty Re: carb settings

Post  sidekick39ish Wed Oct 27, 2010 6:33 pm

15 mins. I`ll give KP 10 mins and he will be sound asleep . Razz
ps. don`t forget to rub his chubby little cheeks, he likes that when he`s sleeping.
carb settings Patty10
sidekick39ish
sidekick39ish
Admin

Posts : 1570
Join date : 2009-01-15
Age : 40
Location : south coast.

http://twinshock-chairs.webs.com

Back to top Go down

carb settings Empty Re: carb settings

Post  Linda L Sat Oct 30, 2010 6:29 pm

awwwwwwwwwwwwww he looks so sexy sleeping, just a pity he has to wakeup. Razz
Linda L
Linda L

Posts : 47
Join date : 2009-10-15
Location : wales/Aus

Back to top Go down

carb settings Empty Re: carb settings

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum